Bridgeport 720 Interact (Issue)


Results 1 to 2 of 2

Thread: Bridgeport 720 Interact (Issue)

  1. #1
    Registered
    Join Date
    May 2018
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Bridgeport 720 Interact (Issue)

    Hi all and thanks for accepting me into the community

    im having an issue with my 720 interact door switch failed and the older gent that used to work on this machine (sadly no longer with us) changed the parameter to make it inactive (the doors can be opened in operation) the HSE wont allow us to run the machine until we fix and reactivate the switch (we have fixed it but have no idea which parameter to change to re enable it) i have the original params list TNC 351/355 just have no idea which 0 to change to a 1 or vice versa to make the door switch active again

    thanks for your time

    Patrick

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2006
    Location
    United States
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Re: Bridgeport 720 Interact (Issue)

    Hello Patrick,

    I believe all you have to do is add 1 to whatever value is in MP158

    The Heidenhain site is a great resource link: https://www.heidenhain.com/en_US/software/

    See attachment for files locations

    Bryan

    Attached Thumbnails Attached Thumbnails Bridgeport 720 Interact (Issue)-file-base-path-351-355-jpg  
    Last edited by num1bryanp; 05-23-2018 at 04:30 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Bridgeport 720 Interact (Issue)

Bridgeport 720 Interact (Issue)