What part of the country are you in? sometimes there are manuals on ebay before you power up you should make shure the power is configured corectly for your sourse heater strips in the spindle drive cabnent and the jumper's on the transformer's if it isent allready configured 220V. then when you first power it us the display will light up and should show all888 on the left display and all000 on the right hand one no err light on , clear reset and you should be able to in setup jog the table if it's not on the limmet switches I will look through my ebay find's and try to foward info on who has book's PM me if you need help getting started Machinetec is verry helpfull on tec question's and has a lot of service bulition's Good Luck Kevin