EMERGENCY HELP


Results 1 to 4 of 4

Thread: EMERGENCY HELP

  1. #1
    Member ktunstill's Avatar
    Join Date
    Apr 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default EMERGENCY HELP

    Biggest order of my life due in 3 weeks. Machine is at a stand still.

    My BOSS LASER machine will not fire. I am NOT technologically inclined, more creative. So I struggle with this. Boss Laser support is not open till Tuesday and I can't be down that long. Can ANYONE help me??

    Similar Threads:


  2. #2
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: EMERGENCY HELP

    The laser won't fire or the machine won't start?

    Does/can you move the cutting head manually?

    Sorry, not familiar with them but with most machines, do some basic troubleshooting like:

    0. The machine of course has power (sorry for asking but you'd be amazed)!
    1. Any error messages on screen or control panels, error indicators, check them against the operator/technical manual
    2. Any fault indicators on electronics modules (see item 1)
    3. Check fuses, circuit breakers and replace any blown fuses and/or reset breakers
    4. The machine of course was working, anything changed - find out and undo if that could be a cause

    If it's CO2 based, has it got gas?



  3. #3
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    787
    Downloads
    0
    Uploads
    0

    Default Re: EMERGENCY HELP

    Quote Originally Posted by he1957 View Post
    The laser won't fire or the machine won't start?

    If it's CO2 based, has it got gas?
    Buhahaha :-D :-D

    CNC lasers, constructions, service


  4. #4
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1740
    Downloads
    0
    Uploads
    0

    Default Re: EMERGENCY HELP

    Check the simple stuff first, power does the machine move and not firing does it have a water flow switch or perhaps a door switch is not working.

    1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EMERGENCY HELP

EMERGENCY HELP