HELP! Z-Axis Won't Move UP


Results 1 to 4 of 4

Thread: HELP! Z-Axis Won't Move UP

  1. #1
    Member ktunstill's Avatar
    Join Date
    Apr 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default HELP! Z-Axis Won't Move UP

    I have a BossLaser LS-1420. My z-axis is not working right. My table will only move down and not up. And sometimes it won't move at all. Any suggestions?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: HELP! Z-Axis Won't Move UP

    Is your auto focus switch stuck I had that happen and it would only move down



  3. #3
    Member ktunstill's Avatar
    Join Date
    Apr 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: HELP! Z-Axis Won't Move UP

    How do you fix that?



  4. #4
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: HELP! Z-Axis Won't Move UP

    I had to replace my switch or you could disable the autofocus in the software



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP! Z-Axis Won't Move UP

HELP! Z-Axis Won't Move UP