Trumpf Trumatic 500 with sheetmaster

Results 1 to 3 of 3

Thread: Trumpf Trumatic 500 with sheetmaster

  1. #1
    Member mabushareb's Avatar
    Join Date
    Dec 2022
    Posts
    1
    Downloads
    1
    Uploads
    0

    Post Trumpf Trumatic 500 with sheetmaster

    Hi all,

    I have a "Trumpf Trumatic 500 with sheetmaster" with Bosch cc220 controller.
    When try to make reference for the machine, I have an error 1080 "Link table not present"
    Can anyone give advice how to solve the problem?

    Best regards.

    Similar Threads:


  2. #2
    Ray59's Avatar
    Join Date
    Feb 2023
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Trumpf Trumatic 500 with sheetmaster

    It is very easy to create the link tables, did you already replaced the batteries? that is the main reason you lost the link tables.



  3. #3
    Member
    Join Date
    May 2010
    Location
    South Africa
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Trumpf Trumatic 500 with sheetmaster

    Quote Originally Posted by Ray59 View Post
    It is very easy to create the link tables, did you already replaced the batteries? that is the main reason you lost the link tables.
    Have you solved your problem?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trumpf Trumatic 500 with sheetmaster

Trumpf Trumatic 500 with sheetmaster