Bosch CC 100 Unable to load parameters

Results 1 to 5 of 5

Thread: Bosch CC 100 Unable to load parameters

  1. #1

    Default Bosch CC 100 Unable to load parameters

    Hello.
    I´M rebulding a old Bosch CC 100.

    I made a video.


    PLEASE some one tell me wath I´M doing wrong?
    After install the parameters file, it stays doing noting.
    I use a null modem and noting change.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Bosch CC 100 Unable to load parameters

    Hi Tony,

    Is the PC handshaking via the serial cable? I seem to remember the CC100 is fairly sluggish even a low baud rates, and will pause transmission (by setting CTS low) until it processes the received data.
    I dont think the CC100 can software handshake, so try hardware handshaking using RTS and CTS, or try a lower baud rate

    Keep us posted

    Rgds
    Loko



  3. #3

    Default Re: Bosch CC 100 Unable to load parameters

    Quote Originally Posted by loko View Post
    Hi Tony,

    Is the PC handshaking via the serial cable? I seem to remember the CC100 is fairly sluggish even a low baud rates, and will pause transmission (by setting CTS low) until it processes the received data.
    I dont think the CC100 can software handshake, so try hardware handshaking using RTS and CTS, or try a lower baud rate

    Keep us posted

    Rgds
    Loko
    Hello, Loko.

    It´s really going in the right direction.
    After trying lower baud and using a new cable. It appears to communicate.
    Now I have finally an error:

    LOAD ERROR 324 - Write Protect Memory. ( one file gives this error)
    LOAD ERROR 216 - Incorrect Data Format ( one file gives this error and others as show on the picture)


    Hi have 2 parameters files, but I´m not Shure that the files are in correct for the Wadkin 2000.

    Attached Thumbnails Attached Thumbnails Bosch CC 100 Unable to load parameters-img-20220129-wa0000-jpg   Bosch CC 100 Unable to load parameters-img-20220129-wa0003-jpg   Bosch CC 100 Unable to load parameters-img-20220129-wa0002-jpg  


  4. #4
    Member
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Bosch CC 100 Unable to load parameters

    Make sure you dont use a windows editor when editing & saving the files. Use something like notepad++ and save in a text only format like unicode



  5. #5
    Member
    Join Date
    Mar 2016
    Posts
    1
    Downloads
    2
    Uploads
    0

    Default Re: Bosch CC 100 Unable to load parameters

    Tonyman, I have similar problems, I have sent the parameters in the past successfully but now that i changed the battery the process does not work. Can you please send me your parameter file to see if mine got corrupt in any way?
    Thank you in advance!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Bosch CC 100 Unable to load parameters

Bosch CC 100 Unable to load parameters