- Need Help!- bobcad 4 axis post just as a flat line in z when I post
-
Member
bobcad 4 axis post just as a flat line in z when I post
I'm using v32. I was always using mill 3 x. No prob.
I decided to try a 4 axis part.
I'm using a 4x machine and 4x post for lunux. It worked a couple of years ago.
Now when I post a part, the toolpath shows up flat on z.
Machine compensation ?
Thanks
jc
Similar Threads:
-
- Need Help!- bobcad 4 axis post just as a flat line in z when I post
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules