Need Help with a variaxis post processor V32


Results 1 to 3 of 3

Thread: Need Help with a variaxis post processor V32

  1. #1
    Member SSIBlake's Avatar
    Join Date
    Dec 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Need Help with a variaxis post processor V32

    Hi guys I'm new to this site, have used bobcad for about 5 years. We recently upgraded to 5 axis software in v32. And I am having a hell of a time getting the machine definition and post processor to work worth anything. I have been working with bobcad for almost a month to get it ironed out and we haven't gotten very far. I could really use any help anyone can provide. It's a variaxis 500 5x with a fusion 640m control.

    Similar Threads:


  2. #2
    Member The Engine Guy's Avatar
    Join Date
    Jun 2008
    Location
    UK
    Posts
    1838
    Downloads
    0
    Uploads
    0

    Default Re: Need Help with a variaxis post processor V32

    First of all what are your issues??

    What is the Axis configuration? is it the usual X,Y and Z axis with a trunion C axis and a 360 degree rotational A axis, or is the Trunnion set up as a B axis ??

    Regards
    Rob



  3. #3
    Member SSIBlake's Avatar
    Join Date
    Dec 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Need Help with a variaxis post processor V32

    x, y, z, trunnion c, and +30 -120 a axis. We are working to develop a post processor. And i think we're finally getting somewhere. Im just having issues with fixture offset stuff at this point (g54.2P_)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help with a variaxis post processor V32

Need Help with a variaxis post processor V32