Need BobCad V30 post for Milltronics Centurion 7


Results 1 to 4 of 4

Thread: Need BobCad V30 post for Milltronics Centurion 7

  1. #1

    Default Need BobCad V30 post for Milltronics Centurion 7

    Need some help please. G-code generated by the post processor I have will not cut a straight line from point A to point B. For example, if a line is programmed to start at point A (X 0.000”, Y 0.000”) and travel to point B (X 10.000”, Y 0.000”) the resulting line will be skewed off by some amount. The resulting line may give a point ending at C (X 10.000”, Y 0.200”). This error occurs in both X and Y directions of travel with unpredictable outcomes. Talked with folks at Bobcad,but they say it will take 2-4 weeks to modify a post for me.

    Anyone have a post they can share?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2013
    Location
    United Kingdom
    Posts
    677
    Downloads
    0
    Uploads
    0

    Default Re: Need BobCad V30 post for Milltronics Centurion 7

    Does the post processor actually create the values X 10.000”, Y 0.200” in the code?

    I quite like targeted ads if they're not intensely annoying so I'll enable ads when your advertisers stop using annoying sounds, annoying slideshows and annoying animations


  3. #3
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: Need BobCad V30 post for Milltronics Centurion 7

    Are you using cutter comp? You have to have a lead in.

    Sent from my SM-N960U using Tapatalk



  4. #4
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: Need BobCad V30 post for Milltronics Centurion 7

    Also i have a post processor for bobcad v30

    Sent from my SM-N960U using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need BobCad V30 post for Milltronics Centurion 7

Need BobCad V30 post for Milltronics Centurion 7