Need Help! Mazak M2


Results 1 to 2 of 2

Thread: Mazak M2

  1. #1
    *Registered User* drummondracecars's Avatar
    Join Date
    Jan 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Mazak M2

    Does Bobcad have a post processor to work with a M2 control on a 4 axis mill ? Also do they offer the comunications cable to do this ?

    Similar Threads:


  2. #2
    Member The Engine Guy's Avatar
    Join Date
    Jun 2008
    Location
    UK
    Posts
    1838
    Downloads
    0
    Uploads
    0

    Default Re: Mazak M2

    What Post Procesor are you currently using??

    Attached is the latest Mazatrol M2 PP, it is configured to use an "A" axis rotary 4th axis.

    BobCAD-CAM does not have a built in DNC for uploading or drip feeding to the Mazatrol control, you would need either the Predator Level 2 that you may have depending on the version of BobCAD you have, or another sofware like "Easy DNC" for example.

    Hope this helps
    Regards
    Rob

    Attached Files Attached Files
    Last edited by The Engine Guy; 01-21-2019 at 01:17 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mazak M2

Mazak M2