Hey Bill,
I'm going to be in a similar boat soon. I'd be interested to know what you end up using. Seems like it might be a slightly different post than the Tormach.
Hey Guys;
I'm getting ready to pull the trigger on a pathpilot conversion on my Novakon Torus Pro w/ Servo and will need a post processor for version 26. Anyone have a link to one?
Thanks.
Bill
Similar Threads:
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Hey Bill,
I'm going to be in a similar boat soon. I'd be interested to know what you end up using. Seems like it might be a slightly different post than the Tormach.
burbingus;
I bit the bullet and went to the bobcad site for support. Idownloaded the PP for the Tormach 1100. We'll see how it works with the novakon. If you want send your email address and I'll send you what I have as long as you realize that I have not tested it as of this time. Maybe this weekend!
Bill
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)