Need Help! Novakon w/PathPilot Post Processor


Results 1 to 3 of 3

Thread: Novakon w/PathPilot Post Processor

  1. #1
    Member bill south's Avatar
    Join Date
    Apr 2005
    Location
    usa
    Posts
    1268
    Downloads
    0
    Uploads
    0

    Default Novakon w/PathPilot Post Processor

    Hey Guys;
    I'm getting ready to pull the trigger on a pathpilot conversion on my Novakon Torus Pro w/ Servo and will need a post processor for version 26. Anyone have a link to one?
    Thanks.
    Bill

    Similar Threads:
    billyjack
    Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)


  2. #2
    Member
    Join Date
    Jan 2016
    Posts
    120
    Downloads
    0
    Uploads
    0

    Default Re: Novakon w/PathPilot Post Processor

    Hey Bill,

    I'm going to be in a similar boat soon. I'd be interested to know what you end up using. Seems like it might be a slightly different post than the Tormach.



  3. #3
    Member bill south's Avatar
    Join Date
    Apr 2005
    Location
    usa
    Posts
    1268
    Downloads
    0
    Uploads
    0

    Default Re: Novakon w/PathPilot Post Processor

    burbingus;
    I bit the bullet and went to the bobcad site for support. Idownloaded the PP for the Tormach 1100. We'll see how it works with the novakon. If you want send your email address and I'll send you what I have as long as you realize that I have not tested it as of this time. Maybe this weekend!
    Bill

    billyjack
    Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Novakon w/PathPilot Post Processor

Novakon w/PathPilot Post Processor