- Need Help!- Post Processor for Dynapath K3 with 2000M CNC Controller
-
Registered
Post Processor for Dynapath K3 with 2000M CNC Controller
I am using the Dynapath OEM post processor with BobCAD v29 and cannot seem to get my Dynapath machine (model K3 with a 2000m CNC controller) to interpret arcs. Whenever a G02 or G03 code occurs an error is prompted that reads "021 start radius <> end radius".
Here's what I have tried:
1. Changed line 550 (interpret curves as lines) in the post processor to 'yes'.
This seems to work but it's not great because it is extremely slow at interpreting the curves.
Does anybody have a post processor that works on a similar machine?
Thanks,
Kemal
Similar Threads:
-
- Need Help!- Post Processor for Dynapath K3 with 2000M CNC Controller
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules