Newbie Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?


Results 1 to 1 of 1

Thread: Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?

  1. #1
    Member
    Join Date
    Feb 2013
    Location
    usa
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?

    After consultation my real requirement is a post processor that work between Bobcad and Linuxcnc. I have a sample of the code that will work, wondering if anybody recognizes it? The file were zip with win 10. The logo file is the one that works ok and is the demo inside linuxcnc. The funucOM file is from Bobcad v23 using the funuc post processor inside bobcad. The funucOM file is of a very simple profile.

    My question is it doable to create a custom post with the info I have?

    Many thanks!

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?

Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?