How do you lose installation disks ?
That's an investment
I would let you use mine,BUT,it's an investment
Hello to all,
Any chance someone has still got the installation disks to V23?
I still have my dongle but the computer with the program installed has crashed and cannot find my original disks as I have moved twice since the original purchase.
I have downloaded the update file from Bobcad but my dongle wont activate the licence as I need the full install to be loaded first.
I keep this V23 on a computer at home as it is handy if I have to draw anything after hours. The drawings update to my newer version when I load them at my workshop.
Any help would be greatly appreciated.
Thank you.
Similar Threads:
How do you lose installation disks ?
That's an investment
I would let you use mine,BUT,it's an investment
1961,
I'm sure I have them. I know I don't have the dongle. I'll check condition tomorrow and let you know. You pay the freight and whatever you think they are worth. Can you do PayPal?
Terry
1961,
I have 1 Installation, 1 Post Processor, 2 Lathe, 2 BobArt, and 11 Mill Training vidios. All in good condition in original cases.
Terry
Hope this isn`t a rude question, but, if you already have a PC with V23 on it and working from your dongle and you are having to make a clean new start on the PC that has crashed then have you looked into getting that good hard drive "cloned" onto a new HDD (Preferably an SSD) and then you would have two PCs running the same level of software ??
If you are not able to do it yourself most decent computer shops can do it for you for not too much cash
Regards
Rob
Thanks guys for the info.
Podunk: Will contact you if I need the disk's, thanks heaps,
Engine Guy: Yes, I have tried to clone but it still won't recognise my dongle, will look further into it,
jrmach: Thanks for that, very helpful....
Yes, BobCAD V23.