Eric, I have heard (perhaps incorrectly) that post processors for Sherline cnc lathes should work and that is what LinuxCNC emulates.
Take it with a grain of salt, I might be completely wrong.
Sent from my Xoom using Tapatalk HD
Hello group,
I am using Bobcad v24 and I have my mill running Mach3. Now I am setting up my cnc lathe but I will be running an older computer using TurboCNC.
I have looked on the Bobcad website and for v24 lathe they do not have a post for TurboCNC.
Has anyone have a TurboCNC post I can use for the lathe? If I have to I will request a post from Bobcad.
Thanks,
Eric
Similar Threads:
- Need Help!- lathe post V24
- Lathe G81 MC post
- Problem- lathe post
- Need Help!- Lathe post
Eric, I have heard (perhaps incorrectly) that post processors for Sherline cnc lathes should work and that is what LinuxCNC emulates.
Take it with a grain of salt, I might be completely wrong.
Sent from my Xoom using Tapatalk HD
CRP-4848 CNC Router, CNC G0463 (Sieg X3) Mill, 9"x20" HF CNC Lathe (current project)