BIESSE SELCO EB80 XML IMPORT


Results 1 to 2 of 2

Thread: BIESSE SELCO EB80 XML IMPORT

  1. #1
    Member JOYBOY's Avatar
    Join Date
    Jun 2024
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy BIESSE SELCO EB80 XML IMPORT

    I am manually writing the measurements on the eb 80 model machine. Instead, I want to import an xml file prepared on the PC. I tried a few times but it gives an error. It accepts extensions such as .cpo .ptn .ptx .xml. How can I make my measurements in xml? I exported a list from the machine. I changed the dimensions in the xml content and imported it again. The import process was completed, but the file was output with errors. How can I make a manual XML cutting list for this machine? Can you help me with this?

    Similar Threads:


  2. #2
    Member Charpy's Avatar
    Join Date
    Jan 2023
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: BIESSE SELCO EB80 XML IMPORT

    Hi, i suppose than your EB80 have the OSI software for cutting ?
    If yes, here some XML generated by an licensed Opticut v6.05g Pro PP (Post-Processor) and it's working perfectly with our Selco SK3 with OSI
    It's for cutting panels with three different dimensions (in millimeters and panel thin = 10 mm)
    3 x 1202 x 402
    4 x 752 x 602
    2 x 602 x 367
    3 files in the zip file:
    BIESSE XML IMPORT V1 (for an machine with an limited cutting levels)
    BIESSE XML IMPORT V2 (for by example an 2022 Selco SK3 with OSI)
    BIESSE IMPORT V3 (NC500) (not an XML but a file with an ".001" as extension, not tested)
    I can provide the Post-Processor file due to copyright, sorry but maybe this file can help you !

    See below for the attachment
    Sorry for my bad english, i'm french !

    Attached Files Attached Files


  3. #3
    Banned Oleg_Po's Avatar
    Join Date
    Feb 2024
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: BIESSE SELCO EB80 XML IMPORT

    Do you have the XML import option active? https://disk.yandex.ru/i/27dhjQM9eeQN6Q If not, then OSI can correctly import the xml file created by native Optiplanning. Optiplanning is also able to import an xml file. I can help with the dongle of these programs.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

BIESSE SELCO EB80  XML IMPORT

BIESSE SELCO EB80  XML IMPORT