- Biesse rover 27 year 2001
-
Member
Biesse rover 27 year 2001
hello
I wonder if you can help me with anything. We bought a Biesse Rover 27 year of bulit 2001 and serial number 0000011475. In addition, the CNC was upgraded with Hops6 and a Windows 8.1 computer. When we tried to put everything together, we found that the entire Windows computer was empty. There was no Hops6 program or anything else.
The rover uses unix with XNC 2.0. The Rover has a network card that the previous owner instaled.
We have currently reinstalled windows 8.1 on the computer, as well as licensed Hops6 with the MtManager program. However, the programs themselves do not help us at all, as we do not have the file that MTManager needs. In short, the whole computer is like new, with no Biesse cnc data.
With the putty program we established a connection to the IP which was already made 172.20.12.50 port 23. We did a ping test and found that the connection works. Cnc uporablja Telnet brez SSH.
The question is. Is there any program where unix could be seen as windows files? How do I get data for MTManager? Because our machine is currently 1 month standing and we no longer know how to solve this problem.
Thanks for the reply and information.
TZibrat
Similar Threads:
Last edited by MizarstvoZibrat; 08-19-2021 at 04:07 AM.
-
-
Member
- Biesse rover 27 year 2001
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules