Biesse Rover A 2007 , axis C1 not homeing


Results 1 to 2 of 2

Thread: Biesse Rover A 2007 , axis C1 not homeing

  1. #1
    Member bartoshdg's Avatar
    Join Date
    Feb 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Biesse Rover A 2007 , axis C1 not homeing

    Hi, i've got problem with my Biesse Rover A 2007 machine. When we start homeing all axes are homed correct but axis C1 is still turning. Proximity sensor is working well. Have you got any ideas what is going ? We are not using that axe. Is that possible to turn it off ?

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2018
    Location
    Australia
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover A 2007 , axis C1 not homeing

    If the sensor is working then it can't be receiving the signal.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesse Rover A 2007 , axis C1 not homeing

Biesse Rover A 2007 , axis C1 not homeing