- Biesseworks, setting up flycut
-
Member
Biesseworks, setting up flycut
New job, New machine. Biesse Rover A. Noticed BiesseWorks is setup to automate flycut, assuming it drops the jig thickness automatically. Previous operators were manually adjust jig thickness and running a spoilboard program to resurface. Having no luck in finding the setting or options for using the flycut shortcut. Assuming need a prog, in a specific location for it to work, but can't find any documentation on how to set it up. Any help would be appreciated. Biesseworks 3.4 btw.
Similar Threads:
-
-
Member
Re: Biesseworks, setting up flycut
If you want to change the thickness of spoilboard in enabled dynamic thickness (=machine doesn't care about the jig thickness in program), you have to press PLC button "jig thickness" on console when machine is in Manual movements. it opens dialog window with current value of jig thickness.
So after every surface cleanning you should modify that value.
- Biesseworks, setting up flycut
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules