Biesseworks, setting up flycut


Results 1 to 1 of 1

Thread: Biesseworks, setting up flycut

  1. #1
    Member
    Join Date
    May 2014
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Biesseworks, setting up flycut

    New job, New machine. Biesse Rover A. Noticed BiesseWorks is setup to automate flycut, assuming it drops the jig thickness automatically. Previous operators were manually adjust jig thickness and running a spoilboard program to resurface. Having no luck in finding the setting or options for using the flycut shortcut. Assuming need a prog, in a specific location for it to work, but can't find any documentation on how to set it up. Any help would be appreciated. Biesseworks 3.4 btw.

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2011
    Location
    Czech Republic
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Biesseworks, setting up flycut

    If you want to change the thickness of spoilboard in enabled dynamic thickness (=machine doesn't care about the jig thickness in program), you have to press PLC button "jig thickness" on console when machine is in Manual movements. it opens dialog window with current value of jig thickness.
    So after every surface cleanning you should modify that value.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesseworks, setting up flycut

Biesseworks, setting up flycut