- beisse editor
-
Member
beisse editor
hi all
i work in a kitchen company and we've just started using the 12mm to 20mm thick concrete worktops (compressed paper i think) what i'm trying to do is create a panel for a kidney shaped sink cut out approx size 500mm - 400mm and then save it so i can import it on to a different panel say 600mm - 2400mm in a set position
any help would be appreciated
mark
Similar Threads:
-
-
Member
Re: beisse editor
Hi Mark, you can save that program with cut as subprogram (into folder p_p/sprog/) and call it from any program by instruction L=subprogram_name .
-
Member
Re: beisse editor
You could also create the machining as a macro and then it'll be saved into it's own little tab on the right hand side under the Macros. Then it'll be a case of changing the variables.
-
Member
Re: beisse editor
Yes, thats possibility if you have Biesse works editor.
- beisse editor
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules