beisse editor


Results 1 to 3 of 3

Thread: beisse editor

  1. #1

    Default beisse editor

    hi all
    i work in a kitchen company and we've just started using the 12mm to 20mm thick concrete worktops (compressed paper i think) what i'm trying to do is create a panel for a kidney shaped sink cut out approx size 500mm - 400mm and then save it so i can import it on to a different panel say 600mm - 2400mm in a set position

    any help would be appreciated

    mark

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2011
    Location
    Czech Republic
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: beisse editor

    Hi Mark, you can save that program with cut as subprogram (into folder p_p/sprog/) and call it from any program by instruction L=subprogram_name .



  3. #3
    Member
    Join Date
    Apr 2018
    Location
    Australia
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: beisse editor

    You could also create the machining as a macro and then it'll be saved into it's own little tab on the right hand side under the Macros. Then it'll be a case of changing the variables.



  4. #4
    Member
    Join Date
    Nov 2011
    Location
    Czech Republic
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: beisse editor

    Yes, thats possibility if you have Biesse works editor.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

beisse editor

beisse editor