Need help with creating tabs in biesseworks


Results 1 to 2 of 2

Thread: Need help with creating tabs in biesseworks

  1. #1
    Member Rovingsailor's Avatar
    Join Date
    Nov 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need help with creating tabs in biesseworks

    I am looking to cut a bunch of small parts from very light stock on a Biesse Rove Plast J. The shop I work for has very limited resources and knowledge, I think tabs would be the best way to hold the parts down but I don't know if this is something I can do in Biesseworks or even have the designer do in Vector works. Sadly this project is a rush so redesigning is rather limited so on the Vector works side it would have to be simple settings only changes. That said any and all advice is welcome.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2018
    Location
    Australia
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Need help with creating tabs in biesseworks

    Not sure if it's too late, but adding tabs in BiesseWorks itself is a pain. If you want to add tabs, you can import the files into Aspire or vCarve and simply click the add tabs option.



  3. #3
    Member
    Join Date
    Nov 2011
    Location
    Czech Republic
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Need help with creating tabs in biesseworks

    Unfortunately the tabs function doesn't exist in Biesse works or even in Biesse software generally.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help with creating tabs in biesseworks

Need help with creating tabs in biesseworks