Biesse Rover 23 Mach 3 conversion


Results 1 to 3 of 3

Thread: Biesse Rover 23 Mach 3 conversion

  1. #1
    Member averellan's Avatar
    Join Date
    Aug 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Biesse Rover 23 Mach 3 conversion

    Hello

    I am about to convert my Rover 23 with Mach3, does anyone have knowlegde of what card to use? And what more stuff I need to buy?

    To begin with, I just want XYZ, motor and toolchanger to work but later on also all other stuff.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Biesse Rover 23 Mach 3 conversion-screenhunter_493-aug-28-20-18-jpg   Biesse Rover 23 Mach 3 conversion-screenhunter_496-aug-28-20-18-jpg   Biesse Rover 23 Mach 3 conversion-screenhunter_495-aug-28-20-18-jpg   Biesse Rover 23 Mach 3 conversion-screenhunter_494-aug-28-20-18-jpg  



  2. #2
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 23 Mach 3 conversion

    There has been a couple of these machines converted to LinuxCNC and there are build threads on the Linuxcnc forum. There is a much greater range off reasonably priced controller options with LinuxCNC. Pretty sure from what was said they are 0-10 volt analog servos so a Mesa 7i77 will take care of the motion side. Depending on if you want to connect via Ethernet or via PCI/PCIe will determine if you use a 7i92 (ethernet), 5i25 (PCI)or 6i25 (PCIe) to connect it to the PC.

    Rod Webster
    www.vmn.com.au


  3. #3
    Member averellan's Avatar
    Join Date
    Aug 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 23 Mach 3 conversion

    Here are some movies from the Biesse with new servos and mach3

    https://www.dropbox.com/s/v8flhnwk02...09.50.mov?dl=0

    https://www.dropbox.com/s/7joa9g4qqq...02.09.mov?dl=0



    Since the servos has been replaced, if anyone is interested of the old servos, feel free to contact me.

    SGDB-20VN
    SGDB-02VN
    SGDB-15VN
    SGDB-10VN

    SGMP-15V316CT
    SGMG-09V
    SGMG-20V
    SGMP-02V3YG11

    Attached Thumbnails Attached Thumbnails Biesse Rover 23 Mach 3 conversion-screenhunter_1803-oct-07-10-14-jpg   Biesse Rover 23 Mach 3 conversion-screenhunter_1804-oct-07-10-14-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesse Rover 23 Mach 3 conversion

Biesse Rover 23 Mach 3 conversion