Biesse Rover A3 - set nesting thickness

[yoramkr]

Hi all

We have a CNC Biesse Rover A3 with Biesseworks.

For a long time we set the manufacturing files (ISO) to set the PLPZ as the material thickness + nesting thickness.
This of curse is not convenient because when we clean the nesting table we need to update the files.

Some one told me that there is a way to set the nesting thickness in the CNC controller itself and specify in the files only the materials thickness.

How do I do that??

Thanks,
Y

Similar Threads:

• Biesse Nesting Table
• Need Help!- Biesse Rover A FT -Nesting -Biesse Editor manual override of nesting algorithm
• Biesse BNest Nesting Assistance
• Biesse NBC-512 add variables after nesting

[yoramkr]

Update
Just got an answer from Biesse.
There is no way to do that.
Only if I create the CNC files on the Biessework.
Currently I'm creating my manufacturing files on another PC with AlphaCam so I guess I'll keep updating my files the hard way...

Thanks

[MarkT]

Place the Quote Window in manual, push the jig thickness plc key. It brings up an additional window that allows you to adjust the jig thickness to whatever it is the last time you ran your spoil surface program. This is on that control for exactly that purpose!
Mark T.
www.cnccustomservices.com