- Biesse Rover A3 - set nesting thickness
-
Member
Biesse Rover A3 - set nesting thickness
Hi all
We have a CNC Biesse Rover A3 with Biesseworks.
For a long time we set the manufacturing files (ISO) to set the PLPZ as the material thickness + nesting thickness.
This of curse is not convenient because when we clean the nesting table we need to update the files.
Some one told me that there is a way to set the nesting thickness in the CNC controller itself and specify in the files only the materials thickness.
How do I do that??
Thanks,
Y
Similar Threads:
-
-
Member
Re: Biesse Rover A3 - set nesting thickness
Update
Just got an answer from Biesse.
There is no way to do that.
Only if I create the CNC files on the Biessework.
Currently I'm creating my manufacturing files on another PC with AlphaCam so I guess I'll keep updating my files the hard way...
Thanks
-
Registered
Place the Quote Window in manual, push the jig thickness plc key. It brings up an additional window that allows you to adjust the jig thickness to whatever it is the last time you ran your spoil surface program. This is on that control for exactly that purpose!
Mark T.
www.cnccustomservices.com
- Biesse Rover A3 - set nesting thickness
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules