- cybelec DNC 880S indexing not complete
-
cybelec DNC 880S indexing not complete
Hii everybody
We have an ADIRA plate bending / pressbrake with cybelec DNC 880S windows based control. The machine not indexing. The blade goes upwards as it does normally but the controller keep showing indexing and not coming to working mode.
We dont have any error messages.
Your help highly appreciated
THANKS
-
-
Re: cybelec DNC 880S indexing not complete
Have you found the solution? I have the same problem…
-
*Registered User*
Re: cybelec DNC 880S indexing not complete
after the blade going up. the X axis (back gauge) will be move.
if the X Axis not move check the Servo drive..
if it moves after that is crowing system.
- cybelec DNC 880S indexing not complete
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules