- Is a DIY aluminium extrusion machine feasible?
-
Member
Is a DIY aluminium extrusion machine feasible?
Hi. Today tabletop extruderscrew plastic injection molding machines for the homeshop is a reality. But what about aluminium extrusion machines? Is is feasible to build a aluminium extrusion machine at home?
In principal it looks pretty straight forward. Just a pipe with a die in the end and a ram with a hydraulic drive and some form of heating to heat the aluminium billett.
So can it be made in she home shop for prototyping? And how much force is typically needed (assuming we use smaller diameter billetts than in normal production machines). And is it practical to make larger diameter extruded parts than the billett used? Maybe via a multi stage die.
I got the idea because i wanted to experiment with some different aerofoil profiles for a project i have. And want to make them out of extruded aluminium so they can be hollow with structural ribs on the inside.
Similar Threads:
-
-
Member
Re: Is a DIY aluminium extrusion machine feasible?
on a micro scale, maybe. most of the extrusion machines ive seen are bigger than my house
-
Re: Is a DIY aluminium extrusion machine feasible?
Extruders are relatively large, so you must pay attention to temperature and humidity during execution
Plastic molding experts
https://www.tigerkj.com/en/industry-...ection-molding
- Is a DIY aluminium extrusion machine feasible?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules