Need Help! Amada RG-100 with NC9-EX controller shut off with lower limit on.


Results 1 to 6 of 6

Thread: Amada RG-100 with NC9-EX controller shut off with lower limit on.

  1. #1
    Member Jer8081's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Amada RG-100 with NC9-EX controller shut off with lower limit on.

    We have an Amada RG-100 with an NC9-EX controller that was shut down with a lower limit set. Now the bed will no drop all the way down. What is the fix for this?

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2009
    Location
    USA
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG-100 with NC9-EX controller shut off with lower limit on.

    Usually people leave the ram lock lever on the left side on (down). release the lever. you should have a yellow button on the face of the ram. Ram Lower with amber light. Press and hold button.



  3. #3
    Member
    Join Date
    Mar 2009
    Location
    USA
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG-100 with NC9-EX controller shut off with lower limit on.

    Amada RG-100 with NC9-EX controller shut off with lower limit on.-rg-ram-jpg



  4. #4
    Member Jer8081's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    That is what we thought it was at first but the lever was up. We tried it anyways and the yellow button does not bring it down. That is why I think it was the lower limit left on.



  5. #5
    Member
    Join Date
    Mar 2009
    Location
    USA
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG-100 with NC9-EX controller shut off with lower limit on.

    Quote Originally Posted by Jer8081 View Post
    That is what we thought it was at first but the lever was up. We tried it anyways and the yellow button does not bring it down. That is why I think it was the lower limit left on.
    Amada RG-100 with NC9-EX controller shut off with lower limit on.-lower-limit-rg-jpg

    Press and hold Lower Limit switch in yellow circle. Have some one start hydraulics. Once Hyd are started move ram up and down. You may have mechanical bind. I have seen a piece of sectionalized tooling fall under machine and hold up ram. Could also be valve, or Ram guide rollers. If machine is 100L it is common to side load the ram and get it stuck. You can remove punch holders from left & right side. Use a dial and check ram parallelism, spec is .03mm. We usually make them .02mm at 2 different heights.



  6. #6
    Member Jer8081's Avatar
    Join Date
    Mar 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    A pin slipped out and was wedged keeping it up. Thanks for the help!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Amada RG-100 with NC9-EX controller shut off with lower limit on.

Amada RG-100 with NC9-EX controller shut off with lower limit on.