Salvagnini p2 ABS programming


Results 1 to 9 of 9

Thread: Salvagnini p2 ABS programming

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Estonia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Salvagnini p2 ABS programming

    Hello,
    I´m have been operating and programming salvagnini p2 for 3 months. Now I would like to learn about ABS programming. I hope that someone could send me some program example to get started width ABS programming. I write my programs manually, not with Edit p4.

    Andy

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2016
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    Quote Originally Posted by andy9 View Post
    Hello,
    I´m have been operating and programming salvagnini p2 for 3 months. Now I would like to learn about ABS programming. I hope that someone could send me some program example to get started width ABS programming. I write my programs manually, not with Edit p4.

    Andy
    Hello Andy9
    Have you already learned a basic course of ABS programing?



  3. #3
    Registered
    Join Date
    Feb 2017
    Location
    Estonia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    Hello,
    I have not learned a basic course of ABS programming therefore its quite hard to get started. I found some examples from manual but they are bit hard to understand.



  4. #4
    Registered
    Join Date
    Dec 2016
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    Quote Originally Posted by andy9 View Post
    Hello,
    I have not learned a basic course of ABS programming therefore its quite hard to get started. I found some examples from manual but they are bit hard to understand.
    You must know that ABS may be gangerous for your machine if you make mistake.
    Is that option already activated on your machine?



  5. #5
    Registered
    Join Date
    Feb 2017
    Location
    Estonia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    I am not sure if the ABS is enabled or not. Is there a easy way to see if ABS is activated or not?



  6. #6
    Registered
    Join Date
    Dec 2016
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    I dont know how to check it phisically but you can insert one ABS command for your regular program and see what the machine say.
    For example
    ABS: Z1 15 Y1 -15



  7. #7
    Registered
    Join Date
    Feb 2017
    Location
    Estonia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    Okey thanx, I will try it out on monday



  8. #8
    Registered
    Join Date
    Dec 2016
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    So what is your result?



  9. #9
    Registered
    Join Date
    Feb 2017
    Location
    Estonia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Salvagnini p2 ABS programming

    Quote Originally Posted by p2_lean View Post
    So what is your result?
    I tried to write ABS command and got error ´´No profile assignment after ABS-set´´ error explanation ´´define profile with instruction PRF XP YP



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Salvagnini p2 ABS programming

Salvagnini p2 ABS programming

Salvagnini p2 ABS programming