Italian Press Brake Mecos

Results 1 to 3 of 3

Thread: Italian Press Brake Mecos

  1. #1
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    78
    Downloads
    0
    Uploads
    0

    Default Italian Press Brake Mecos

    Does anyone have any information about the Italian built press brake Mecos.
    Is the company still active? I tried to email them and it was returned to me.
    Has anyone used there machines and what is your opinion of the machine.
    I am looking at the Mecos Mini 35 ton 4 foot press. I am concerned parts availability
    may be a problem as I am in Washington USA and I cannot find a USA representative.
    Thank you for your help

    Similar Threads:


  2. #2
    pressbraketools's Avatar
    Join Date
    May 2018
    Location
    Milan
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    If you need something from Italy let us know. Anyway about Mecos normally we do not see them active...



  3. #3

    Arrow Circuit board CEIP SH-C.VP-365

    Does anyone have seen a circuit board that handles +/- 10 Vdc to a hydraulic system for a press.
    Please look at the picture posted, the circuit is pretty simple. It was built in the 1990's from Italian company.
    This board goes into a base plug-in. It generates the voltage basic on a foot pedal which it activates a linear potentiometer installed at the foot pedal.
    Any other questions can be send to zagchaos@gmail.com or text me at 509-869-0736

    Thank you all



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Italian Press Brake Mecos

Italian Press Brake Mecos