- Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed
-
Member
-
-
Member
Re: Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed
I attach what I have. I have not been able to find a digital version of the manuals so they are both scanned from the original manuals.
https://drive.google.com/file/d/1bW0...ew?usp=sharing
https://drive.google.com/file/d/14W8...ew?usp=sharing
I´ve had my share of experiences with these errors. They look strange and the information is scarce but they are usually right on target. I would not be surprised that the thermal overload is stuck, this should be quite easy to measure disconnecting the cables and checking continuity with a tester. It is quite obvious you will not get signal to the coil if the thermal overload alarm is present.
Hope this helps. It would surprise me very much if you could find any actual information regarding the board itself.
Good luck
- Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules