- NEED HELP. Amada RG-100 with NC9-EX controller
-
Member
NEED HELP. Amada RG-100 with NC9-EX controller
I believe our press was shut off with a lower limit input on the controller. Now the bed won’t drop down past the lower limit when turned back on. Need help to get the bed to drop back down.
-
- NEED HELP. Amada RG-100 with NC9-EX controller
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules