Anyone know of a CNC retrofit kit for the PM 728 VT

[rlaury]

Hi All

Just purchased a PM-728 VT and I want to retrofit it to CNC. PM has a kit in the works, but It's going to
be awhile before it's available. Anyone else offering a kit?

Thanks
RonL

Similar Threads:

• New Machine Build- Jet 830 CNC Retrofit
• Millpwr Retrofit-Retrofit on Bridgeport
• Newbie- Sieg X1 retrofit with Linux EMC2, CNC Fusion retrofit kit and Gecko G540
• Need Help!- camsoft retrofit to a anilam crusader retrofit

[cncmakers001]

Hi All

Just purchased a PM-728 VT and I want to retrofit it to CNC. PM has a kit in the works, but It's going to
be awhile before it's available. Anyone else offering a kit?

Thanks
RonL

Hi Laury, what is the required motor sizes of XYZ axis and spindle? by KW or NM.

[rlaury]

X and Y will be NEMA 23 Z will be a 43. All Clearpath.

[joeavaerage]

Hi,
Clearpath are good quality and have good support but are expensive.

Take a look at Delta (Taiwanese brand manufactured in China) or DMM (Canadian brand manufactured in China) which are also good quality
with good support and documentaion and four times the power for the same or less money. Delta and DMM have vastly more IO and
control modes in addition. Clearpath have been made simple to hook up but that comes with a cost, very little IO and basic control modes only.



Craig

[mrosso]

Has anyone created a 3D model of the PM-728vt?

[Bcap63]

ProcutCNC has a complete setup for sale.
https://procutcnc.com/collections/pm...-w-o-enclosure