Video MINITECH MINI MILL LINUXCNC


Results 1 to 3 of 3

Thread: MINITECH MINI MILL LINUXCNC

  1. #1
    Member Cellfreak's Avatar
    Join Date
    May 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default MINITECH MINI MILL LINUXCNC

    I just traded a 3040 CNC for a 1990s MINITECH MINI MILL. I used the same older DELL PC. That has a parallel port. I was using MACH 3 on the 3040. Went with LINUXCNC this time. As I was able to aquire the .cfg file with all of the parameters filled in.



    Similar Threads:
    Last edited by Cellfreak; 02-14-2020 at 05:31 AM. Reason: Url


  2. #2
    Member
    Join Date
    Mar 2007
    Location
    Romeo, Michigan, USA
    Posts
    304
    Downloads
    0
    Uploads
    0

    Default Re: MINITECH MINI MILL LINUXCNC

    Nice Little machine. The only drawback is that you'll want more power and speed soon.

    [url]www.CNC-Joe.com[/url]
    CNC Is Not Just My Passion.. It's My Addiction !!!!


  3. #3
    Member mwalter's Avatar
    Join Date
    Jun 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: MINITECH MINI MILL LINUXCNC

    This is great. I have been trying to get one of these running for a local middle-school. The software was toast so I got LinuxCNC installed. I have not had any luck with the configuration files. Any chance you can share them? Also, have your stepper motors been getting hot? Not sure if it is settings or over-voltage. The power supply that it came with (stock from MiniTech) is putting out 13.81 V. Thanks in advance.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MINITECH MINI MILL LINUXCNC

MINITECH MINI MILL LINUXCNC