Reply with QuoteIf the motor is 3Phase then any VFD Drive that matches the motor size is all you needOriginally Posted by tofurobotixs
AC sewing motor as spindle.....Any advice?
Hi there,
Just wanna ask has anybody tried using an ac industrial sewing motor as a milling motor spindle? I know using hybrid stepper motor as a spindle is a bad idea and I cannot afford to buy an AC servo. Getting treadmill motor is out of question for me as I am unable to find a controller that runs 220V ac of my country. Thank you.
Similar Threads:
Re: AC sewing motor as spindle.....Any advice?
If the motor is 3Phase then any VFD Drive that matches the motor size is all you need
Mactec54
Regarding torque and reliability, can it be use to drive a spindle for long duration milling aluminium?
Re: AC sewing motor as spindle.....Any advice?
What type and size of machine will the motor go on?
What is the power you expect to need( HP or Watts of the motor) ?
It is just a normal benchtop cnc with a sherline industrial spindle catridge. The motor I am looking at is a 550w sewing machine motor (https://www.lazada.sg/products/ac-220v-550w-adjustable-mute-brushless-motor-for-industrial-sewing-machine-i269081527-s417904579.html?search=1)
Re: AC sewing motor as spindle.....Any advice?
This facebook group has a post from a few years ago. The person used something similar on an X2.
https://www.facebook.com/groups/1523...f=group_header
The date of thier post was 19 September 2017.
Posting Permissions
