New Machine Build One shot oiler


Results 1 to 2 of 2

Thread: One shot oiler

  1. #1
    Member
    Join Date
    Feb 2008
    Location
    canada
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default One shot oiler

    Hi Guys..

    I was hoping for an opinion from someone who has installed a one shot oiler before... Where on the machine or stand did you put your pump?

    There are several spots I have considered but if anyone has done it and were happy or unhappy with the location you selected I would like to hear about it and why.

    Here is a photo of my machine...



    I am open to suggestions as to where the best location for a one shot pump would go.

    Thanks,
    Pat

    Similar Threads:
    Attached Thumbnails Attached Thumbnails One shot oiler-imag0060-1-jpg  


  2. #2
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    197
    Downloads
    0
    Uploads
    0

    Default Re: One shot oiler

    I'm putting mine below the machine with non-return valves fitted.
    I read you want to try to limit it being able to flow on it's own while stationary by keeping the pipework etc below your oil points where possible.
    Gravity is not it's friend.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

One shot oiler

One shot oiler