advice needed for the z-motor


Results 1 to 2 of 2

Thread: advice needed for the z-motor

  1. #1
    Registered
    Join Date
    Oct 2006
    Location
    Nederland
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default advice needed for the z-motor

    Hi guys,

    I have a little question. I'm trying to convert a HBM BF20 large table (just another version of the BF20). I'm using 2,2 or 2,5 Nm motors on the X and Y (both will be 3:1). But what motor should I use for the Z. It will also be ratio of 1:3 or 1:6. I use a standard leadscrew setup. I hope I make sense. I hope I can use a 4 Nm stepper (I know a good supplier fot those). I'm not looking for a speed monster.

    grtz.

    Danny van Dijk
    Rotterdam, Nehterlands, Europe

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23632
    Downloads
    0
    Uploads
    0

    Default

    Did you see this previous post, It looks like someone else from the netherlands.
    http://www.cnczone.com/forums/showthread.php?t=15538
    Maybe something in there may help or PM the Guy.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

advice needed for the z-motor

advice needed for the z-motor

advice needed for the z-motor