Bob,
The advertisement on Amazon has the same milling head controls, see attached link:
https://www.amazon.com/Grizzly-S-X3-Mill-Drill-21-Inch/dp/B000M66WKO
Welcome to the Zone,
Jeff...
Hello All,
I am new to the forum. I have plans to convert a mill/drill to CNC. If I was buying new I might buy the G0704 but I came across a G0619 from a local seller at a great price. I have been speaking with the seller but have not inspected the machine yet.
In the pictures I noted that the front panel appears different than all of the pictures I have seen - See attached image. I searched but was unable to find a similar panel.
The seller states that the machine was purchased in 2014 and was used a handful of times. Is this front panel consistent with that year of purchase?
Thanks,
Bob
Similar Threads:
Bob,
The advertisement on Amazon has the same milling head controls, see attached link:
https://www.amazon.com/Grizzly-S-X3-Mill-Drill-21-Inch/dp/B000M66WKO
Welcome to the Zone,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
The picture you posted looks exactly like my G0619 that I purchased I 2013.