k.will post in a few
OK just download CPU-Z sir >>> DOWNLOADING CPU-Z_1.80-EN.EXE | CPUID
I need something like this
if you run CPU-Z you can find your motherboard model on the mainboard tab
k.will post in a few
Manufactuer: [Dell,Inc.]
Model: [0C27VV] [A01]
Having issues with uploading pics on here. sorry. is that what you needed?
For that, as soon as the computer starts up, press F12 when the DELL logo is displayed to enter the Boot Device Menu. With the down arrow key, select the line System Setup and press Enter. You can now change the the BIOS settings.
Link >>>https://espace.cern.ch/winservices-h...ptiplex780.htm
what do I need to change them to? serial port #1 is set to auto.
k, I changed the raid setting like you said and rebooted my computer.
it crashed the system when I switched to the RAID Autodetect / AHCI
No sir, the steps is only for you to enter the BIOS, sorry to put the link that`s meant for the AHCI setting, you need to go to advanced settings to set the LPT1 port to epp mode
something like this
I don't see an advanced setting for the LPT1 port?
ohh in the startup f12 menu. k let me check
k, got it. applied EPP mode
I think you`re all set sir, the only one remaining culprit you had now is the profile or the XML file settings, I think I need you to try my copy of that (......) but every time I attempt to post a link on it my whole post will be deleted my our boss here, do you have a facebook account ? or any means to transfer the file to you?
Hi there
Can u post a photo of your input signals screen in Mach?
Cheers scott
I would of thought the xml file from gecko drive will be a good start
G540 XML File - Step Drives - Application Notes - Support | GeckoDrive
john
also make sure that the cable you got is a straight thru cable. Pin 1 on one side should go to pin 1 on the other and the same for all other pins. I had this problem my first attempt hooking up a G540. Motors would lock, but no movement.
on that topic, are your motors locking up?
I have a similar problem with my vinyl cutter. I don't have a Driver serial port, it won't install to my computer
Sent from my SM-G920T using Tapatalk