BF20 Real life Mach3 motor tuning


Results 1 to 3 of 3

Thread: BF20 Real life Mach3 motor tuning

  1. #1
    Registered
    Join Date
    Nov 2009
    Location
    Australia
    Posts
    98
    Downloads
    0
    Uploads
    0

    Default BF20 Real life Mach3 motor tuning

    Hi guys,

    I was just wondering what values BF20/G0704 owners are using for Acceleration & Velocity.

    My setup is:
    570 steppers
    KL-6050 set at 1/8 micro stepping
    48 Volt power supply
    1605 Ball screws
    (basically Hoss's reccomendations for the elctronics)

    I've got the 320 steps per mm sorted, just wondering what seems to be good values to start off with

    Cheers
    Rob

    Similar Threads:
    Stoner #1


  2. #2
    Member Kenny Duval's Avatar
    Join Date
    Jan 2013
    Location
    United Stated
    Posts
    630
    Downloads
    0
    Uploads
    0

    Default Re: BF20 Real life Mach3 motor tuning

    I'm using the following

    100 in/min and acceleration rate of 15 on each axis.



  3. #3
    Registered
    Join Date
    Nov 2009
    Location
    Australia
    Posts
    98
    Downloads
    0
    Uploads
    0

    Default Re: BF20 Real life Mach3 motor tuning

    Cheers Kenny

    Stoner #1


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

BF20 Real life Mach3 motor tuning

BF20 Real life Mach3 motor tuning