[URL="http://youtu.be/g37_94EXq6I"]Video of idea[/URL]
- Inverted mount
- Not too sure about hinge forces. Using 8mm pin might not be enough. 1/4" aluminium plate might also be too weak.
- Trying to leave room around the pulley for the Stirling belt drive, in order to change the belt without removing the plates.
- Cyl. size and mounts unknown for now. Probably about 9" long with 2" stroke.
Huge thanks to all the guys who have "been there and done that". Saves me lots of experimental aggravation.