Problem ball screw replace for Chinese cnc 6040z

Results 1 to 6 of 6

Thread: ball screw replace for Chinese cnc 6040z

  1. #1
    Member
    Join Date
    Aug 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default ball screw replace for Chinese cnc 6040z

    Does anybody know the dimensions for X axle ballscrew cnc 6040z?
    As i understand it is sfu1605, however it's length is 760mm, i can not find any sfu1605 with that length.

    Similar Threads:


  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: ball screw replace for Chinese cnc 6040z

    Some sellers will cut the ballscrew and machine the ends to your specification. Or you could buy a longer ballscrew and find a local machinist to cut it.

    P. S. "6040z" is a pretty generic term, so measurements from someone else's machine may or may not be correct for yours.



  3. #3
    Member
    Join Date
    Sep 2009
    Location
    India
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: ball screw replace for Chinese cnc 6040z

    @sashaKR

    You should pull out the screw and make the drawing- the way ball screws are supplied are as plain screws with a ball nut based on your selection. We normally specify the end dimensions which the ball screw supplier then machines and grinds and then gives to us. (I've purchased at least 20 ball screws till date)

    Best of luck!

    Jaideep



  4. #4
    Member
    Join Date
    Aug 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: ball screw replace for Chinese cnc 6040z

    Thank you for your replies.
    I understand that ball screw can be manufactured almost any dimension, however i was hoped that for standard cnc, standard ball screw should be enough. There are so many parameters, therefore i don't want to risk and put an order with my measurements. I've seen a lot of standard sfu1605, sfu1610 - so i hoped there should be standard for my cnc as well



  5. #5
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: ball screw replace for Chinese cnc 6040z

    Have some faith in yourself. Measure the ballscrew the best you can and compare it to the screws available for sale. Maybe you will find a suitable ready-made one. Does not need to be 0.001mm accurate; you will adjust it anyway with shims, washers, spacers and such.



  6. #6
    Member
    Join Date
    Jun 2013
    Posts
    443
    Downloads
    0
    Uploads
    0

    Default Re: ball screw replace for Chinese cnc 6040z

    And buy a ballscrew already machined. Well, in New Zealand, the people who can machine ballscrews just quoted me NZ$250 for one. Yep.

    Sent from my SM-N970F using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ball screw replace for Chinese cnc 6040z

ball screw replace for Chinese cnc 6040z