Seized Ball Screw

Results 1 to 2 of 2

Thread: Seized Ball Screw

  1. #1
    Member Colt4587's Avatar
    Join Date
    Feb 2019
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Seized Ball Screw

    Evening all,

    I apparently over extended my double ballscrew and caused it to Jam. I was able to to get the one half that was jammed off. But when I re-packed and put it back on, it seized and now won't twist enough to get it off. Am I totally screwed, or is this something that can be fixed? If it can be fixed, how?

    Thanks for your time.

    Similar Threads:


  2. #2
    Member Colt4587's Avatar
    Join Date
    Feb 2019
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Re: Seized Ball Screw

    Ok,

    I got it unseized I've got it repacked, and I've got it back on the ballscrew. What is the proper procedure for combining the two nuts? There are the two half ring things, with the two bars and screws. I have it back together now, with the slightest amount of play between the two. Is this normal?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Seized Ball Screw

Seized Ball Screw