Avid CNC New touch plate dimensions

[cdistefano]

Hi everyone,
I own a legacy version of the Avid CNC, a 48x60 CNCRP. I recently updated to the Mach4 version and I see that with the new touch plate (the square version) I can set not only Z, but X and Y zeroes. I was wondering if anyone could share the dimensions of the new square touch plate, I think I can 3D print it and use the old cables/connector.

The Avid CNC website only has the dimension of the copper touch plate, but not the aluminum housing.

Thanks in advance.

Carlos.

Similar Threads:

• CNC RP/Avid Touch Plate
• Crafty CNC Touch Probe (wired for CNC Router Parts / Avid)
• CNC Router Parts / Avid Touch off Plate
• Avid touch plate occasionally moves spindle up
• Newbie- K2 CNC touch plate

[Ctbjdm]

I have this and can check later; you're looking for the 'interior' dimensions of the touch plate area itself right?

[Ctbjdm]

It's 56mm x 56mm interior, and 72mm x 72mm exterior dims - some info found here: https://www.avidcnc.com/auto-z-and-c...ate-p-288.html