One Axis Speed Adjustment Controller

[automationtechinc]

Product Link:
https://www.automationtechnologiesin...axis-speed-kit

One Axis Speed Adjustment Controller:

This 1-axis stepper motor speed controller can be used for sliders, such as, a camera slider, a conveyor, etc. This setup use the pulse Signal Generator to control the speed. The controller has two operating options; frequency and PWM signals and offers a start/stop button along with a forward/reverse button.

The speed controller can be powered from 12v to 72v DC and a 5v power supply.

1: 1pcs 48VDC, 7.3A Switching Power Supply,

click the link 48V/7.3A Switching CNC Power Supply (KL-350-48)

2: 1pcs KL-5056 driver, 50vdc/5.6A

click the link KL-5056 20-50VDC 5.6A Digital Bipolar Stepper Motor Driver -32 bit DSP Based

3: 1pcs NEMA23 280z/in 2.8A Stepper Motor 1/4 Dual shaft

Click the link: NEMA23 280oz/in 2.8A 1/4" Dual Shaft Stepper Motor (KL23H276-28-4B)

4: 1 pcs Speed Adjustment Controller ( knob to adjust to different speed, Start/Stop, Forward/backward) click the link : Stepper Motor Pulse Signal Generator

This is only a sample, We can change to any motor, driver, power supply to fit your application.

You can add a USB or Ethernet

Similar Threads:

• Need Gear Chart picture (speed adjustment table) of TORNOS RR-20 lathe
• Where is the speed adjustment screw on an X3 board?
• Mach3 Jog speed adjustment
• Speed adjustment on a V2XT
• Does controller change axis motor speed?