Video Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3


Results 1 to 1 of 1

Thread: Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3

  1. #1

    Default Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3



    G0704, BF20L, PM25MV CONTROLLER WITH STEPPER MOTORS WITH ETHERNET CONNECTION
    Detail Page Link: https://www.automationtechnologiesin...f20lcontroller

    This Controller is for G0704 or BF20L or PM25MV, X3 Machine

    mill machines

    It is assembled and tested with Mach3 software. it will work for sure for your machine

    Digital Stepper Control Box and X and Y , Z Stepper Motor.

    1: Controller Box: Aluminum Box (up to 6 axis)

    2: 2 PCS KL-5056E Bipolar Digital Stepper Drivers, 50V, 5.6A for X, Y Motors

    3: 1 PCS KL-8070D Bipolar Digital Stepper Drivers, 80V, 7.0A for Z axis Motor

    4: 1 PCS 48V/12.5A Power Supply, 115V/230V

    5: Ethernet Board: Mach3 or Mach4 Ethernet board

    6: 1 PCS Fan

    7: 1pcs 24V and 5V Power Supply 110-230VAC

    8: Power cord

    9: X,Y Stepper Motors, NEMA23 570 oz-in, 5A, 3/8" Shaft, or 1/4" Shaft

    10: Z Stepper Motor, NEMA34 1200 oz-in, 6A, 1/2 inch shaft with 12 feet cable

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3-g0704-kit-jpg   Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3-g0704-kit-2-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3

Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3

Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3