Need Help! dip switch settings for 5056 stepper driver


Results 1 to 3 of 3

Thread: dip switch settings for 5056 stepper driver

  1. #1
    Registered
    Join Date
    Jul 2003
    Location
    michigan,brighton
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default dip switch settings for 5056 stepper driver



  2. #2
    Registered
    Join Date
    Jul 2003
    Location
    michigan,brighton
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default Re: dip switch settings for 5056 stepper driver

    Franco explanation














    Quote Originally Posted by sidecar82 View Post
    hello
    I Need to set the
    dip switch settings
    for the 3 KL-8056 Drivers
    https://www.automationtechnologiesin...rivers/kl5056/

    2
    (KL23H2100-50-4B)
    X,Y motors
    https://www.automationtechnologiesin...lat-570-oz-in/

    and
    1
    KL34H280-55-4A
    For Z
    https://www.automationtechnologiesin...-640-oz-in-55/

    pin 4 off for x,y on full current for Z

    direct drive PM-25 Mill

    2nd build




  3. #3
    Registered
    Join Date
    Jul 2003
    Location
    michigan,brighton
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default Re: dip switch settings for 5056 stepper driver

    got machine PM-25 cnc conversion moving
    switches

    DO NOT FLIP SWITCHES UNDER POWER
    U will Blow the drive
    No Smoke 2 ?


    set step switches
    5,6,7,&8
    to--- off,off,on,on
    8th step
    stepper motor 20 steps per revolution 1.8 DEG = 200 steps.
    So that 1600 steps per rev

    I thought the ball screws were in inches they are not
    they are metric

    I MDI command X 7 inches machine moves to 6.889 measured
    Display shows 7.0000

    machine moved measured 175 mm=6.889
    stepper motor made 35 turns

    SO to calculate of a metric screw
    turns per inch for a metric ball screw
    7 inches =7*25.4=177.8 mm

    177.8/35=5.08
    so 5.08 = number of turns of the ball screw to
    get inch inch of movement
    hope this help some one ?

    machine now moves the correct distance
    YES 7 inches
    8th step plenty of Power no stall
    forgottoturnonspindlemotor

    end mill pushed part out of vise ?

    still attempting to mill

    been using MDI

    switch 4 set to off (off makes power reduction to on ?)
    123
    for X,Y on off on
    for Z on,off,off

    motors have been on for over a hour and are cool, not even warm!
    and had Power to move

    DO NOT FLIP SWITCHES UNDER POWER
    U will Blow the drive
    No Smoke 2 ?

    OK that all for now



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

dip switch settings for 5056 stepper driver

dip switch settings for 5056 stepper driver

dip switch settings for 5056 stepper driver