KL-34GH101WPS 10:1 Right Angle Planetary Gearbox


Results 1 to 1 of 1

Thread: KL-34GH101WPS 10:1 Right Angle Planetary Gearbox

  1. #1

    Default KL-34GH101WPS 10:1 Right Angle Planetary Gearbox

    Link:

    https://www.automationtechnologiesin...2/kl-34gh101a/

    KL-34GH101WPS 10:1 Right Angle Planetary Gearbox WITH STEPPER MOTOR, REDUCE THE SPEED, INCREASE TORQUE, PRECISION, MAINLY USED FOR CNC ROUTER, CNC PLASMA,CNC LASER, MANY OTHER AUTOMATION SYSTEM

    GEAR RATIO 10:1

    Backlash: less than 7 arcmin

    Standard NEMA34 (Input and Output side)

    Max Input Speed: 8000 RPM

    Average Input Speed: 4000 r/min

    Nominal Output Torque: 100 N-m ( 14100 oz-in)

    Max. Output Torque: 200 N-m ( 28200 oz-in)

    Average Lifetime: 20000H

    Shaft: 1/2 inch

    Hole Size: 1/2 inch

    Noise: less 60 dB

    It will work with our NEMA 34 motors or Servo Motor

    Similar Threads:
    Attached Thumbnails Attached Thumbnails KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-jpg   KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-front-jpg   KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-side-jpg   KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-bottom-jpg  

    KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-top-jpg   KL-34GH101WPS 10:1 Right Angle Planetary Gearbox-gearbox-back-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

KL-34GH101WPS 10:1 Right Angle Planetary Gearbox

KL-34GH101WPS 10:1 Right Angle Planetary Gearbox